Product Specifications - Inateck FE3001 Manual De Instrucciones

Hard drive installation steps
1. Take out the screws and slide the hard drive tray out of the enclosure.
2. Using the included screw driver, connect your SATA SSD/HDD to the
SATA connector and attach it to the drive tray by driving 2 of the
installation screws through the stabilizing holes on the bottom of the
drive tray into the bottom mounting holes on your HDD/SSD.
3. Slide the hard drive tray back inside the enclosure and drive 2 of the
enclosure installation screws into the side hard drive tray mounting
holes on the enclosure.
4. Complete installation by connecting your hard drive enclosure to your
computer using the USB port and power it up.

Product specifications

Product name
Product type
Weight
Color
Supported drives interface
Maximum height of drives
Hot plug，plug&play
Power Supply
Licenses
Measurements
Supported OS
screw hole
USB3.0 3.5" HDD External Enclosure
Inateck FE3001
280g
black
SATAIII/II/I
Height of up to 9.5mm HDD/SSD supported
supported
12V/2.0A
CE，FCC
190x112x32mm
Windows XP/7/8/10；Mac9.0 or above