Tabla de contenido
Publicidad
Power on
To turn on the Shelly Motion, use a stick or pin to press the button
next to the USB connector as shown below.
Prepare device for inclusion
To be successfully added to your Wi-Fi network, Shelly Motion
must glow BLUE. If this is not the case, please use a pin and press
the button next to the USB port for 10 seconds. This will put the
device in INCLUSION mode and turn its Wi-Fi mode on an Access
Point named shellymotion-xxxxxxx
INSTALL SHELLY APPLICATION
Shelly Cloud gives you opportunity to control and adjust all
Shelly® Devices from anywhere in the world. You only need an
internet connection and our mobile application, installed on your
30
User and Safety guide
Publicidad
Tabla de contenido
