Safety and handling
EN
!
Attention:
For your own safety please read these safety instructions and these ope-
rating instructions prior to using the head tracker for the first time.
Please note that the head tracker is only for use as an accessory for the
cinemizer
wed. Failure to follow the instructions can result in injury or damage.
Safety and handling
Connected to a computer, the cinemizer
PC mouse. It is connected to a computer using only a standard USB port.
As a result the head tracker is suitable for all applications that can be
controlled using a computer mouse.
The cinemizer
of the right ear clip. In this way movements of the head (rotations) are
detected by the sensor and passed to the computer. As a consequence it
is possible to look around a virtual environment with natural head move-
ments.
Storage and transport
Only use the head tracker in a temperature range between
5 °C and 35 °C.
Only store the head tracker in a temperature range between
-20 °C and 60 °C.
The head tracker is not slash-proof and also not water-proof. For this
reason do not use it in the rain or in damp environments. Should the
head tracker have been subjected to moisture, disconnect it from the
computer. Leave the device to dry fully before you use it again. Do not try
to dry the head tracker with the aid of an external source of heat, e.g. in
a microwave oven or using a hair dryer.
Repair
Never attempt to make any unauthorised repairs to the head tracker.
Damage not covered under the warranty may occur on disassembly. In
case of need for repair, please contact the cinemizer support team. You
will find this team at www.zeiss.com/cinemizer/support
2
and this device's safety instructions are also to be follo-
OLED
head tracker is attached to the video glasses instead
OLED
head tracker behaves likes a
OLED