Using Your Single Cup Coffee Maker:
1. Before use, clean the jug and accessories as described in this manual.
2. Place the Milk Frother on a flat, level surface. Choose the correct whisk/assembly
and insert it firmly onto the shaft at the base of the jug. See chart below.
3. Pour the milk into the jug according to the max& min mark inside the jug.
4. Place the lid firmly onto the jug. Then press the desired function button to turn on.
When heating / whisking is complete, unplug the product from the electrical outlet.
Note: You can cancel the process anytime by pressing the On/Off "
Attention: First use may cause a slight odor or small smoking upon heating, it is
normal. This is a result of the heating element chemical reaction. It quickly goes away.
Button
Setting
Hot Milk
Foam
Cold Milk
Foam
Hot Milk
No Foam
Hot Cocoa
Application
Perfect for use with
cappuccino or latte macchiato
drinks.
Cold, creamy milk foam for
frappé drinks, cocktails, iced
coffee and desserts
This setting provides a quick
and easy way to heat milk for
lattes or cups of warm milk.
*Remove spring.*
Use this setting to make hot
chocolate drinks using
crumbled / shaved chocolate.
*When making Hot Cocoa,
pour in milk first to the Jug,
then add chocolate
Whisk
4
◼
" button.
Volume
MIM 100 ml
MAX 200ml
MIM 100 ml
MAX 200ml
MIN 100ml
MAX 400ml
MIN 100ml
MAX 300M
MAX 30g
Chocolate