Decoupling The Light From The Smartdevice; Pairing Several Lights - pro-emit sunflow Manual De Instrucciones

7.2.4 Decoupling the light from the Smartdevice

To decouple a lamp, select "Lamp near me" under the "More" menu item.
Select the applicable lamp and then click "Decouple".
The sunflow is now decoupled.
"Flickering" is necessary if the sunflow is coupled to another Smartdevice. To create a
"flickering", unplug the power cord and then plug it back into the power point.

8.3 Pairing several lights

Up to four additional sunflow units can be connected and controlled together when us-
ing the sunflowPRO. For this purpose, the power supply can be routed from one module
(220-240V current output) to the next module (220-240V current input) using the C13/
C14 connection cable supplied with the sunflow unit. It is possible to transfer the dim-
ming signal of the Casambi module from one module (DIM output 0-10V) to the next
module (DIM input 0-10V), using the 3.5 mm mono jack cable supplied with the sunflow
unit.
This way, up to 5 lamps can be controlled simultaneously via a sunflowPRO. If a larger
number of lamps must be controlled together, it is possible to group several sunflowPRO
lamps in the app and thus control them together.
28