Eiko WMG-5C-40K-U Instrucciones De Instalación página 2

0-10V DIMMING:
THE RECOMMENDED IMPLEMENTATION OF THE DIMMING CONTROL IS PROVIDED BELOW.
L
N
G
• The dimmer can also be replaced by an active 0-10V voltage source signal or passive components like resistors and zener.
• Do NOT connect Dim- to the output or V- or V+, otherwise the driver will not work properly.
• If 0-10V dimming is not used, Dim+ should be open.
EiKO Global, LLC • 23220 W. 84th St, Shawnee, KS 66227 • (P) 1-800-852-2217 • (F) 1-800-492-8975 • eiko.com
EiKO Canada • 81 King St, Barrie, Ontario L4N 6B5 • (P) 1-705-721-5189 • (F) 1-705-721-7855 • orderdesk@eiko.com
Rev. 4/19/2017
V+ (RED)
VAC V- (BLUE)
V AUX (BLK/WHT)
DIM+ (PURPLE)
DIM- (GREY)
IO/IOSET VS. DIMMING VOLTAGE (V)
0-10V
DIMMER
DIMMING VOLTAGE (V)