Listening To Fm Radio - i-Star IS-AC01 Manual Del Usuario

5 Setting the time: Press the BACKWARD
FORWARD button
confirm.
Listening to the FM radio
Before switching on the radio make sure the antenna (18) is unrolled
and fully extended.
1. Press the POWER button
2. Press the BACKWARD
the frequency.
3. Press and hold the BACKWARD
to automatically tune to the next available FM station.
4. Press the Volume + button
the Volume - button
5. Press the POWER button
Setting preset stations
You can store up to 10 preset stations.
1. First tune to a station.
2. Press and hold the MEM/M+ button (10) until "P01" (or the next
available preset slot) shows on the display.
3. Press the BACKWARD
a preset number (P01-P10).
4. Press the MEM/M+ button (10) button to confirm. The preset
station has been set up.
5. Press the MEM/M+ button (10) repeatedly while listening to
the radio to select a preset station. Alternatively, press the MEM/
M+ button (10) once and then press the BACKWARD
FORWARD button
Using the alarm function
Setting alarms
You can have two alarms set at any one time. To set the alarms:
1. In standby mode, press and hold (for 2 seconds) the ALARM 1
(13) or ALARM 2
2. Then press the ALARM 1
repeatedly to cycle through the setting options:
Alarm time > Alarm sound source > Alarm frequency
3. To set alarm time: Press the BACKWARD
and FORWARD button
PROJECTION ALARM CLOCK RADIO - User Guide
>
(12) to set the minute, press SET
(15) to turn on the radio.
<
(11) or FORWARD button
<
(14) to increase the volume, press
(13) to reduce the volume.
(15) to turn off the radio.
<
(11) or FORWARD button
>
(12) to select a preset station.
(14) button to enter the alarm setting mode.
(13) or ALARM 2
>
(12) to set the minute. Then press the
www.philex.com
<
(11) to set the hour and
(11) or FORWARD button
(14) button
<
(11) to set the hour
(10) to
>
(12) to adjust
>
(12)
>
(12) to select
<
(11) or
5