1 Operating instructions MystMaker I
The MystMaker I is a device that sprays water through an ultrasonic technique that creates real water mist
and therefore air humidity. The MystMaker I is designed for use indoors and can be used for numerous
versatile applications such as an atmospheric effect for room fountains, as a humidifier for terrariums or just
to create a pleasurable room atmosphere.
Technical data
Art.-No. EU
Art.-No. UK
Trafo
Nominal voltage
Nominal capacity
Length of the cable (cable)
Creation of mist (mist quantity)
Min. immersion depth (depth in water)
Water temperature
Membrane (disc)
Scope of delivery
Safety regulations
The voltage supply has to comply with the product specifications. The device should possess a residual current
protection switch (FI Switch) and be operated with a nominal fault voltage of ≤ 30mA. If necessary, inform yourself as
to which connection regulations you have to apply with your local electricity supplier.
• The MystMaker I must only be operated using the safety transformer that has been delivered and should be
operated exclusively in inside areas.
• Always switch off the power supply before touching the MystMaker I.
• Do not hold any parts of your body such as your finger in the water fountain of the MystMaker I and place the
device in a position so that no house pets can come into contact with it.
• Take care that no water sensitive objects are situated within 30 cm of the MystMaker I.
• Remove the plug from the socket when the MystMaker I is not going to be operated over a longer period.
• Never use the cable to carry the MystMaker I and never pull it out of the water using the cable.
A replacement of the electric cable is not possible. The device has to be disposed of if the cable is damaged.
1387091
1387591
230 VAC 24 VAC
230 VAC / 50 Hz
30 W
1,80 m
approx. 90 ml/h
60 - 80 mm
5 - 40 ° C
Ø 20 mm
MystMaker I incl. 1 ceramic membrane Ø 20 mm ,
Safety transformer 24 VAC, Special keys
3