Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Rear handle Installation:
2.
a.
Run the connecting cable through the hole
of the steel spindle all the way up to the rear
handle.
b.
Align the steel spindle and connecting column
screws with the holes in the lock body.
c.
Secure the rear handle and the front handle
with the connecting column screws. Twist the
knobs and make sure they work normally.
d.
Connect the cable to the terminals in the bat-
tery compartment.
e.
Snugly fit the remaining cable into the door
hole and place the battery compartment inside
the rear handle.
f.
Insert 4 AAA batteries.
g.
Place the battery compartment cover and secu-
re with the 2 screws.
Rear handle
Connecting
Note:
Make sure that the remaining cable is well fitted so that the battery holder can be properly
inserted into the rear handle.
22
screws
Battery holder
Steel spindle
Connecting
columns
Batteries
Battery
cover
Publicidad
Tabla de contenido
