Eu Declaration Of Conformity - GMC OS187CF Manual Del Usuario

Technical Abbreviations & Symbols Key
Volts
V
Alternating current
~, AC
Ampere, milli-Amp
A, mA
No load speed
n
o
Rated speed
n
Orbits or oscillations per
opm
minute
Newton metres (torque)
Nm
Diameter
Ø
Hertz
Hz

EU Declaration of Conformity

The undersigned: Mr Darrell Morris
as authorised by: GMC
Declares that:
This declaration has been issued under the sole responsibility of the manufacturer.
The object of the declaration is in conformity with the relevant Union
harmonisation Legislation.
Identification code: OS187CF
Description: Corded 1/3 Sheet Sander
Conforms to the following directives and standards:
• Machinery Directive 2006/42/EC
• Low Voltage Directive 2006/95/EC
• EMC Directive 2004/108/EC
• RoHS Directive 2011/65/EU
• EN60745-1+A11:2010
• EN60745-2-4+A11:2011
• EN55014-1+A1:2009
• EN55014-2+A2:2008
• EN61000-3-2+A2:2009
• EN61000-3-3:2013
Notified body: TÜV Rheinland
The technical documentation is kept by: GMC
Date: 23/11/2015
Signed:
Mr Darrell Morris
Managing Director
Name and address of the manufacturer:
Powerbox International Limited, Company No. 06897059. Registered address: Powerbox,
Boundary Way, Lufton Trading Estate, Yeovil, Somerset BA22 8HZ, United Kingdom.
Watt, kilowatt
W, kW
Ohms (resistance)
Ω
Operations per minute
/min or min
-1
Revolutions per minute
rpm
Blows (impacts) per
bpm
minute (drill)
Impacts per minute
ipm
(impact driver)
Decibel sound level
dB(A)
(A weighted)
Metres per second squared
m/s
2
(vibration magnitude)
Specification
Model number
Voltage
Power
No load speed
Sanding sheet attachment
Sanding sheet dimensions
Base dimensions
Oscillating diameter
IP rating
Protection class
Length of power cord
Dimensions (H x L x W)
Weight
Sound and vibration information:
Sound pressure L
PA
Sound power L
WA
Uncertainty K
Weighted vibration a (main handle)
h
Uncertainty K
WARNING: Always wear ear protection where the sound level exceeds 85dB(A) and limit the
time of exposure if necessary. If sound levels are uncomfortable, even with ear protection,
stop using the tool immediately and check the ear protection is correctly fitted and provides
the correct level of sound attenuation for the level of sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense of touch, numbness,
tingling and reduced ability to grip. Long term exposure can lead to a chronic condition. If
necessary, limit the length of time exposed to vibration and use anti-vibration gloves. Do not
operate the tool with hands below a normal comfortable temperature, as vibration will have a
greater effect. Use the figures provided in the specification relating to vibration to calculate the
duration and frequency of operating the tool.
Sound and vibration levels in the specification are determined according to EN60745 or
similar international standards. The figures represent normal use for the tool in normal
working conditions. A poorly maintained, incorrectly assembled, or misused tool, may produce
increased levels of noise and vibration. www.osha.europa.eu provides information on sound
and vibration levels in the workplace that may be useful to domestic users who use tools for
long periods of time.
7
OS187CF
220–240V~, 50/60Hz
1.5A 300W
12,000min -1
Hook and loop and conventional clamp
fitting
1/3 sheet (93 x 190mm)
187 x 92mm
2mm
IP20
3m
190 x 360 x 130mm
2.4kg
76dB(A)
87dB(A)
3dB
7.1m/s 2
1.5m/s 2
GB