Installation Requirements
• Phillips screwdriver
• Standard-sized, 19" wide rack with a minimum of 1U height
available
• For indoor applications, use Category 5 (or above) UTP
cabling approved for indoor use.
• For outdoor applications, shielded Category 5 (or above)
cabling should be used for all wired Ethernet connections
and should be grounded through the AC ground of the
power supply.
We recommend that you protect your networks from
harmful outdoor environments and destructive ESD events
with industrial-grade, shielded Ethernet cable from Ubiquiti.
For more details, visit: ui.com/toughcable
Note:
the UDM-Pro itself should be housed inside a
protective enclosure.
Before You Begin
Ensure the device is powered off before you install the 3.5" or
2.5" HDD (not included).
1.
Although the cabling can be located outdoors,