Package Contents
UniFi Protect
ViewPort
M6 Screw
System Requirements
• UniFi Protect software TBD v1.X or above, available at
ui.com/downloads/unifi
Installation Requirements
• Phillips screwdriver
• Drill and 6 mm (1/4") bit for drywall anchors
• Drill and 6 mm (1/4") bit or 8 mm bit (5/16") for screws
• Shielded Category 5 (or above) cabling with drain wire
should be used for all wired Ethernet connections and
should be grounded through the AC ground of the PoE.
Mounting
Bracket
M8 Screw
Double-Sided
Tape
Drywall Screws
(Qty. 2)
HDMI Cable
Screw Anchors
(Qty. 2)