Checking The Battery Charge Level; Operation; Switching On And Off; Working Instructions - Deltafox DP-CWL 2042 Traducción Del Manual De Instrucciones Original

be replaced. Only use
an OEM battery pack re-
placement available from
our Customer Service.
• Always take heed of the
applicable safety in-
structions as well as the
environmental protection
regulations and informa-
tion (see "Cleaning and
Maintenance").
Checking the
battery charge
level
The battery's (4) charge
level is indicated by the
charge state indicator (7).
• Press the charge level
indicator button (6) on
the battery (4). The char-
ge level of the battery is
indicated by illumination
of the corresponding
LED light.
red-yellow-green =>
Battery fully charged
red and yellow =>
Battery half charged
red =>
Battery needs to be char-
ged

Operation

Switching ON and
OFF
1. To start, press the on/
off switch (1). The LED
lamp (10) illuminates
with maximum bright-
ness.
2. To reduce the bright-
ness, turn the dimming
switch (9) until it covers
the LEDs.
3. To switch off, briefly
press the on/off switch
(1).

Working instructions

Do not stare into
the battery-po-
wered LED work
light when it is
switched on
Do not place the
battery-powered
LED work light on
top of the battery!

Hanger

Using the hanger (3), you
can attach the battery-
powered LED work light to
an object (e.g. onto a hook
or a nail).
GB
25