Tabla de contenido
Publicidad
Input / Green wire
1. Connect the power adapter to the socket on the front of the device. Then plug the other end of the power
adapter into a power outlet.
2. Connect to the device via an Ethernet cable connected to LAN port.
1. To enter the router's Web interface (WebUI), type
2. Use login information shown in image A when prompted for authentication.
3. After you log in, you will be prompted to change your password for security reasons. The new password must
contain at least 8 characters, including at least one uppercase letter, one lowercase letter, and one digit. This step
is mandatory, and you will not be able to interact with the router's WebUI before you change the password.
4. When you change the router's password, the
used to set up some of the router's main operating parameters.
A.
Power / Red wire
HARDWARE INSTALLATION
admin
admin01
POWER SOCKET PINOUT
LOGIN TO DEVICE
http://192.168.1.1
Configuration Wizard
Ground / Black wire
Output / White wire
into the URL field of your Internet browser.
will start. The
Configuration Wizard
is a tool
Publicidad
Tabla de contenido
