Timberland TBL13551 Manual De Instrucciones página 3

Size: 170 x 55mm
Color: Blk
a. TIMEKEEPING
4. Press "D" to increase the number,
Calendar
press and hold to increase at high
• In the timekeeping mode, press
speed. Press "C" to decrease the
and hold "D" to display:
number, press and hold to decrease
Year, Month, Date.
at high speed.
Time Setting
1. In the timekeeping mode, press
and hold "A" until the seconds to
flash (flashing indicated in set mode). 5. Repeat step 3 and 4, the selection in
the following sequence:
Seconds Hour
Month Date
2. Press "C" or "D" to reset the
seconds.
6. Press "A" to exit the set state,
after you set (The day of week is
automatically displayed in accordance
3. Press "B" change to the next
with year, month and date setting).
selection.
Size: 170 x 55mm
Color: Blk
c. DATA
Split
Lap
4. In the data mode, press "A"
the watch display the time of
first SPL.
1. In the data mode, the watch
display the time of first LAP.
5. Press "D" to forward browse
the time for another.
2. Press "D" to forward browse
the time for another.
6. Press "C" to backward browse
the time for another.
3. Press "C" to backward browse
the time for another.
7. Press "A" to enter the stopwatch
mode in the browse split time state.
b. STOPWATCH
A Lap Time
1. In the stopwatch mode,
press "D" to start the stopwatch.
Minutes Year
12/24H format. 2. Press "A" to stop the stopwatch.
3. To reset the stopwatch by pressing
"A" again.
d. COUNTDOWN
• When the countdown reaches zero, the alarm
sounds for about 60 seconds and press any button
to break it.
Countdown Timer Setting
1. In the countdown mode, press
and hold "A" the hour to flash
(flashing indicated in set mode).
2. Press "D" to increase the hour,
press and hold to increase at high
speed. Press "C" to decrease the
hour, press and hold to decrease
at high speed.
3. Press "B" change to the next
selection.
Split Time
1. In the stopwatch mode,
press "D" to start the stopwatch.
2. Press "D" to display the split time,
auto change to running state after
2 seconds.
3. Repeat step 2, you can measure the
multi split time.
4. Press "A" to stop the stopwatch.
4. Press "D" to increase the
number, press and hold to
increase at high speed.
Press "C" to decrease the
number, press and hold to
decrease at high speed.
5. Repeat step 3 and 4, the selection in
the following sequence:
Hour Minutes Seconds.
6. Press "A" to exit the set
state, after you set.
Use Countdown Timer
1. Press "D" to Start the
countdown timer.
2. Press "A" to Pause the
countdown timer.