Publicidad
Model Number 60116
Assembly Instructions
Carefully unpack all parts and identify them with the parts list before
attempting to assemble.
IMPORTANT: DO NOT TIGHTEN BOLTS AND SCREWS UNTIL
YOU HAVE COMPLETED ASSEMBLY.
1. Put the 5 CASTERS (A) into the holes on the 5 STAR BASE (B).
2. Insert the GAS LIFT (C) to the center hole top of the 5 STAR BASE
(B).
3. Insert the BELLOW (D) over the GAS LIFT (C).
4. Attach the BACK CUSHION (I) to the SEAT CUSHION (G) by
positioning BACK SUPPORT PLATE (J) with 4 SCREWS (E) using
ALLEN KEY (K).
5. Attach both the left and right ARMRESTS (H) to the SEAT
CUSHION (G) and BACK CUSHION (I) by using the 8 SCREWS (E)
with 8 CAPS (O).
6. Attach the assembled seat unit onto the gas lift by insert the top of
the gas lift into the steel plate hole located on the underside of the
seat cushion.
7.
Be sure that all screws are fully tightened before using.
Parts List
Description
A. CASTERS
B. 5 STAR BASE
C. GAS LIFT
D. BELLOW
E. SCREWS (Ф1/4" X 1")
G. SEAT CUSHION
H. ARMRESTS (L&R)
I. BACK CUSHION
J. BACK SUPPORT PLATE
K. ALLEN KEY
O. CAPS
Quantity
5
1
1
1
12
1
2
1
1
1
8
Publicidad
