Publicidad
Idiomas disponibles
Idiomas disponibles
LLR69516
Assembly Instructions
Carefully unpack all parts and identify them with parts list before
attempting to assemble the chair.
IMPORTANT: DO NOT TIGHTEN BOLTS AND SCREWS FULLY UNTIL
YOU HAVE COMPLETED THE FINAL ASSEMBLY.
1. Put 5 CASTERS (A) into the holes on 5 STAR BASE (B).
2. Insert GAS LIFT (C) into the center hole top of 5 STAR BASE (B).
3. Insert BELLOW (D) over GAS LIFT (C).
4. Attach BACK CUSHION (J) with the BACK SUPPORT to SEAT
CUSHION (E) using 4 SCREWS (I).
5. Attach both the left and the right ARMRESTS (F) to BACK CUSHION
(J) and SEAT CUSHION (E) by using 4 SCREWS (G) and 4 CAPS(H).
6. Adhere the loop of the BACK CUSHION (J) to the hook of the SEAT
CUSHION (E).
7. Insert the pre-assembled seat unit onto the gas lift to finish the
assembly.
8. Be sure that all the screws are fully tightened before using.
Description
A. CASTERS
B. 5 STAR BASE
C. GAS LIFT
D. BELLOW
E. SEAT CUSHION
F. ARMRESTS (L&R)
G. SCREWS (M8 X 25MM)
H. CAPS
I.
SCREWS (M8 X 27MM)
J. BACK CUSHION
K. ALLEN WRENCH
Parts List
Quantity
5
1
1
1
1
2
4
4
4
1
1
Publicidad
