Instrumax SNIPER 30 Manual De Instrucciones página 8

8
ilar semi-permeable surfaces. Aiming at high gloss surfaces
deflects the laser beam and measurement errors can occur.
Against non-reflective and dark surfaces the measuring time
can be increased.
PRECAUTIONS
Please, handle the instrument with care. Avoid viabrations,
hits, water, effect of heat. During transportation put the instru-
ment into the soft bag.
Note: the instrument should be dry!
Care and cleaning
Do not immerse the instrument in water. Wipe off dirt with a
damp, soft cloth. Do not use aggressive cleaning agents or
solutions.
Specific reasons for erroneous measuring results
- Measurements through glass or plastic windows;
- Dirty laser emitting window;
- After instrument has been dropped or hit. Please check the
accuracy;
- Large fluctuation of temperature: if instrument will be used
in cold areas after it has been stored in warm
areas (or the other way round) please wait some minutes
before carrying out measurements;
- Against non-reflective and dark surfaces, colorless surfac-
es and so on.
Electromagnetic acceptability (EMC)
It cannot be completely excluded that this instrument will
disturb other instruments (e.g. navigation systems); will be
disturbed by other instruments (e.g. intensive electromag-
netic radiation nearby industrial facilities or radio transmit-
ters).
Laser classification
INSTRUMAX Sniper 30 projects visible laser beam from the
front part of the instrument. The instrument is a laser class
2 laser product according to DIN IEC 6082 5-1:2007. It is
deflects the laser beam and measurement errors can occur.
Against non-reflective and dark surfaces the measuring time
can be increased.