Getting Started - Jays a-Six Wireless Guia De Inicio Rapido

EN English

Getting started

Power on/off and pairing
To power on, press and hold the center button for 3s. A voice assistant will
tell you the current battery status. Pairing mode will automatically be initiated,
indicated by the LED blinking slowly. Go to Bluetooth
device and select "JAYS a-Six Wireless". The blinking LED will turn off upon a
successful connection followed by a short audio beep.
To power off, press and hold the center button for 3s.
Reconnecting and additional pairing
Next time you power on, the earphones will automatically try to reconnect
to the most recently used device. If not found, or if you manually disconnect
through your device, pairing mode will automatically be initiated again. To
force pairing mode, press center button for 5s from off state.
Battery status and charging
When on, press and hold the down-button 2s for voice assistant battery status.
Battery high: 70-100%
Battery medium: 30-70%
Battery low: 0-30%
When battery is below 3%, "Battery low" will be announced automatically.
Charge using a USB cable and connect it to any certified USB power output.
Charging is indicated by a solid red light, and a full charge is indicated by a
solid white light.
Troubleshooting
Problem pairing and connecting
• Make sure the earphones are not connected to another device.
• Disable and enable Bluetooth on your device.
• Move the earphones closer to the device or alter their positions
to avoid Bluetooth interference.
• Verify no other wireless equipment interfere with your earphone
Bluetooth signal.
Problem with sound transmission
Move the streaming device to another position. Your body, distance, different
materials and other wireless equipment can interfere with the wireless signal
between your device and earphone.
® settings on your
Legal & Warranty
Environmental information
This product complies with international directives, including but
not limited to WEEE Directive (2012/19/EU). Do not dispose with
normal household waste. Please consult your local waste disposal
authority for guidance on how to properly recycle or dispose of
this product.
Manufacturer's limited warranty
Your original Jays Group AB product is covered by a warranty of twelve (12)
months from the date of purchase of a brand new, unused Jays Group AB
product by the original purchaser. Jays Group AB guarantees that the product
is free from faults in the materials, design and workmanship when it was sold
to the purchaser. If you are not able to submit the receipt when making a
warranty claim you may be obliged to pay for any repairs carried out. Proof
of purchase must clearly state the date of purchase, name of the product and
authorized resellers' details
The Warranty Period cannot be extended or renewed due to subsequent
resale or replacement of the product. This Limited Warranty does not affect
your legal rights under your applicable national laws relating to the sale of
consumer electronic products. Defective parts replaced within the Limited
Warranty Claim shall become the property of Jays Group AB.
What is not covered by the limited warranty?
• Faults caused by wear and tear, age-related battery capacity loss, accidents,
dropping, mechanical damage, moisture, chemical products, abnormal
impact damage or force majeure.
• Modifications or repairs performed by yourself or third party without Jays
Group AB approval.
How to get warranty service
If you wish to make a Warranty Claim within the Limited Warranty Period,
please contact the reseller of your product for further help. You will need
to provide the proof of purchase and the affected part. Any defective parts
covered by the Limited Warranty will be repaired or replaced free of charge.
Replaced or repaired parts provided during the Warranty Period will be
warranted for the remainder of the original Warranty Period or for sixty (60)
days from the date of repair or replacement, whichever is longer. For FAQ
please visit www.jaysheadphones.com.