Publicidad
Idiomas disponibles
Idiomas disponibles
FIGURE 2
3
8
6
11
15
#8 BOLT M6*40
Step 2:
Fasten the cross brace (#5) to the rear of arms
(#3 and #4) by using bolts (#6). Fasten the rear of
the seat assembly (#1) and the cross brace (#5) to
arms (#3 and #4) by using bolts (#8) and plastic
washers (#11). Keep the bolts loose. See Figure 2.
FIGURE 4
Warranty
• This product is covered by Courtyard Creations Inc.'s 3 year limited warranty.
• Proof of purchase (dated register receipt) is required for warranty claims.
• It remains the customer's responsibility for freight and packing charges to and from the service center.
STOP!
Missing A Part?
No Need To Go Back To
The Store
The store where you made your purchase
does not stock parts for this item.
If you need parts,
whether they are missing or damaged,
Call Toll Free:
TEL: 1-877-539-7436
FAX: 1-877-539-7439
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
For further assistance,
please visit us at
service.cci@polywares.com
V-3
1
5
4
#6 BOLT M6*15
40
READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
SEPARATE AND IDENTIFY ALL OF THE PARTS, MAKING SURE THAT
YOU HAVE ALL OF THE PARTS LISTED.
IF YOU DO NOT LOCATE ALL OF THE PARTS LISTED, INSPECT THE
PACKING MATERIAL FOR SMALL PARTS THAT MAY HAVE BECOME
SEPARATED DURING SHIPMENT.
IF YOU EXPERIENCE ANY DIFFICULTY DURING ASSEMBLY OR IF ANY
PARTS ARE MISSING OR DAMAGED, CALL THE HELP LINE AT
1-877-539-7436 BEFORE RETURNING THIS ITEM TO THE STORE.
PROVIDE THE FOLLOWING INFORMATION WHEN CALLING:
1-MODEL NUMBER OF THE PRODUCT.
2-PART NUMBER AND MATERIAL CODE OF THE PART FROM THE PARTS
MOST PROBLEMS CAN BE RESOLVED WITHOUT RETURNING THIS
PRODUCT TO THE RETAILER.
STOP
DO NOT RETURN TO THE STORE!
FIGURE 3
8
Step 3:
Turn the chair to its upright position. Fasten the back
assembly (#2) to the seat assemby (#1) by using bolts
(#8), washers (#9), and plastic nuts (#10). Make sure
that all of the bolts have been tightened completely.
See Figure 3.
Step 4:
Position the back assembly as illustrated in Figure 4.
Cleaning and Maintenance
• Wash frame and fabric parts with mild soap and water,
rinse thoroughly, and dry completely. Do not use bleach,
acid, or other solvents on the frame or fabric parts.
• We recommend the use of furniture covers when not
in use.
• Inspect and tighten all of the bolts and fasteners on a
regular basis to ensure proper performance and safety
of your chair.
• In order to prolong the life and beauty of your chair,
we recommend that it be stored in a dry and protected
area during off season periods.
LIST.
PAGE 2 OF 2
9
10
40
#8 BOLT M6*40
2
1
Publicidad
