System Installation
1.
Start your PC. If it is already started, restart it. It will then obtain an IP Address from the
WN-300ARM-VPN's DHCP Server.
2.
Start your WEB browser. In the Address bar, enter the following:
3.
When prompted, use the
• User name: admin
• Password: airlive
4.
Click Setup Wizard on the menu.
5.
Step through the Wizard until finished. Refer to the data from your ISP, and the table below, to ensure
your choices are correct.
Connection Type
Dynamic IP Address
Specified (Fixed) IP Address, or
IPoA (IP over ATM)
PPPoE, PPPoA
English
6
following username and password.
Data required.
Usually, none.
IP Address allocated to you, and related information.
Login name and password.
If using a fixed IP address, the IP address and related
information.
http://192.168.0.1
WN-300ARM-VPN