Troubleshooting - PROZIS FLIPPt Manual Del Usuario

EN
plates (gas, electric...). Operate the
product on a level, stable, clean,
heat-resistant and dry surface.
• Do not cover the product while in use
or shortly after use, when it is still hot.
• Make sure the power cord is not
pinched by the plates and that it does
not touch the rim of the plates.
• The baking tray of this product has a
nonstick surface, so that it's easy to
clean. Therefore, please do not use
any metal or hard abrasive tool to
wipe the interior/exterior of its body.
User manual
PACKAGE CONTENTS
1 × Prozis Flippit- Snack Maker
1 × Sandwich Plate Set
1 × Quick Guide
PRODUCT OVERVIEW: (SEE PAGE 2)
1. Lock
2. Handle
3. Plate-switch button
4. Upper cover
5. Plate
6. Lower cover
7. Foot
MAINTENANCE AND CLEANING
10
• Unplug the device after use and wait for it to cool down. Wipe the interior of the baking tray with a damp
cloth and make sure the device is clean. You may also remove the baking tray once it has cooled down to
wipe it. Protect the device from water drops and water spray.
• Use a clean, dry cloth for cleaning the appliance and never use any corrosive liquids.
• Do not use aggressive or abrasive cleaning agents or materials such as scouring milk or steel wool. They
can damage the upper surface of the appliance!
• Make sure moisture does not enter the product while cleaning to prevent damage to the product and
related repairs. Do not rinse the main body by immersing it in water, to avoid any electric leakage or
problems.
• The baking tray of this product has a non-stick surface, making it easy to clean. Do not use any metal or
hard abrasive tool to wipe the interior/exterior to avoid scraping the surface.
• The baking trays are dishwasher-safe.
STORAGE
• Allow the appliance to cool down completely before storing it.
• Wind the power cable around the retainer at the base of the appliance.
• When no longer using the device, store the product in a dry environment, protected from dust and direct
sunlight.
• Store your appliance inside the original case provided.
INSTRUCTIONS
OPERATING INSTRUCTIONS:
1.Choose the plate you want for your snack: sandwich, waffle or pancake plate. 2.To replace the plates,
make sure they have completely cooled down. 3.Replace the plates by pressing the plate release button (at
the front of the device). When inserting the plate, make sure it is properly installed and locked in. 4.Place
the food on the plate (add a dash of cooking oil on both plates, if you prefer). 5.Close the sandwich maker.
6.There may be a slight odor and smoke when using it for the first time. This is normal and harmless. Just
make sure you have enough ventilation. 7.After 3-5 minutes, the light will switch off to indicate the sandwich
maker has heated to the proper cooking temperature. The light will be switching on and off, and the
sandwich maker will always be kept at the proper cooking temperature. 8.Your snack can be taken out. You
define how toasted you want it to be. Be aware that the cooking surface is hot, so take it out carefully. 9.Your
snack will be hot. Wait a few minutes before enjoying it. 10.Unplug the power cord after cooking and allow
the sandwich maker to cool down, before moving it to clean or storing it.

Troubleshooting

Some issues that arise may be solved by the user. If the problem persists after having tried the following
solutions, please contact Prozis customer service.
PROBLEM
The food is too toasted
The food is not toasted enough
It is difficult to remove the toasted food from the tray
The appliance is not working
SOLUTION
Shorten the cooking time
Extend the cooking time
Lightly grease the plates before cooking. Try using a different
batter recipe
Insert the plug into the wall outlet or check the fuses and the
circuit breaker
EN
11