User Maintenance; Cleaning & Maintenance - Andis CNG-1 Instrucciones De Uso Y Cuidado

Ocultar thumbs Ver también para CNG-1:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 10
6. IMPORTANT: Do not apply excessive force when grinding. Let the speed of the
grinder do the work. Do not apply pressure to the nail with the spinning grinding
wheel. Pressure causes the nail to get hot and will cause pain to the dog.
7. Keep the nail grinder away from the nail when first starting, or the grinder may
"grab" the nail and cause loss of control or injury to the dog.

USER MAINTENANCE

Cleaning and user maintenance shall not be made by
children without supervision.
The internal mechanism of your nail grinder has been permanently lubricated at the
factory. Other than the recommended maintenance described in this manual, no
other maintenance should be performed, except by Andis Company or an Andis
authorized service station.
CLEANING & MAINTENANCE
• Turn the nail grinder OFF and remove the multi-function protective cap by twisting
counterclockwise to unlock and pulling straight up.
• Brush or blow off dust or other material from nail grinder after each use.
• Use a soft cloth to wipe off nail grinder.
• Replace grinding attachments when worn.
• Check cords and nail grinder for damage periodically.
Caution: Never handle your Andis nail grinder while you are operating a water
faucet, and never hold your nail grinder under a water faucet or in water. There is
danger of electrical shock and damage to the appliance. Andis Company will not
be responsible in case of injury due to this carelessness.
9

Publicidad

Tabla de contenido
loading

Tabla de contenido