Additional Features - Corsair T1 RACE Manual Del Usuario

Additional Features

1. Attach Neck Pillow
A. The neck pillow has a snap
attachment that allows the
pillow to be installed in two
different ways. You can slide
the band over the top
of the headrest for taller
placement of the pillow or
attach the pillow through the
holes in the neck area for a
lower placement of the pillow.
7 7
2. Attach Lumbar Pillow
A. The straps for the lumbar pillow
will need to be run in two different
directions.
B. One set will go through the opening
between seat cushion and seat back.
C. The top will be routed through the
holes in the shoulder area.
D. Once both sets of straps have been
routed, they can be snapped together
on the backside of the chair.
E. Slide the lumbar pillow up or down to
suit your ergonomic needs.
User Manual
WARNING: Improper use of this chair may cause damage to this chair
or result in personal injury. Please use this chair in a non-abusive manner.
1. Tilt lock/height adjustment lever
A. Push the lever towards the center of
the chair to engage the tilt lock. Pull
it away from the chair to disengage
the tilt lock.
B. To lower the height of the chair, pull
the lever upwards while weight is
applied on the chair. To increase the
height, pull the lever up while the
chair is empty.
2. Recline lever
A. Pull this lever up to recline the seat
back forward or backward.
B. WARNING: Do not apply pressure
to the seat back prior to pulling the
recline lever. The sudden shift of
weight may cause the chair to
become unstable which may cause
damage to the chair and/or result in
personal injury.
8 8