Installing The Mounting Plate - HOMEDEPOT DB30TBN-LP Guía De Uso Y Cuidado

Installation (continued)
3

Installing the mounting plate

NOTE: Y ou may need a longer downrod to maintain proper
blade clearance when installing on a steep, sloped ceiling.
The maximum angle allowable is 18° away from horizontal.
REMEMBER to turn off the power. Follow the steps below to hang
your fan properly.
Secure the mounting plate to the ceiling outlet box as
shown in Figure 6 by using two screws and washers (not
provided). Make sure the mounting plate is level.you may
need to insert additional washers (not provided) between
the outlet box and the mounting plate to make it level.
Outlet Box
Figure 6
DB30TBN/ORB/WH-LP
Before making the electrical connections, engage one of the
screw holes at the top of the ceiling canopy with the hook on
the mounting plate (Figure 7).
Hook
6
Mounting
Canopy
Plate
Screw
Canopy
Bayonet
Slot
Round Hole
Figure 7