Werner A230400 Para El Usuario página 9

KNOCK DOWN ROOF ANCHOR
2. Werner Co. connectors (snap
hooks and carabiners) are
designed to be used only as
specified in each product's
user's instructions. See for
inappropriate
InaPProPrIaTe ConneCTIons
A.
NO!
D.
NO!
Werner Co. snap hooks and carabiners should NOT be
connected:
i. to a D-ring to which another connector is attached.
ii. in a manner that would result in a load on the gate. If the
connecting element that a snaphook or carabiner attaches
to is undersized or irregular in shape, a situation could occur
where the connecting element applies a force to the gate of
the snaphook or carabiner. This force may cause the gate
(of either a self-locking or a non-locking snaphook) to open,
allowing the snaphook or carabiner to disengage from the
connecting point.
NOTE: Large throat opening snap hooks should not be
connected to standard size D-rings or similar objects which
will result in a load on the gate if the hook or D-ring twists
or rotates. Large throat snap hooks are designed for use on
fixed structural elements such as rebar or cross members
that are not shaped in a way that can capture the gate of
the hook.
connections.
B.
NO!
NO!
USER INSTRUCTIONS
ProPer ConneCTIon
C.
NO!
E. F.
NO!
NO!
NO!
Page 9