Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Do not operate machine before having read
the operating instructions, understood all the
notes and assembly the machine as
described here.
Keep the instructions in a safe place for future use.
Contents
EC Declaration of Conformity
No. (Nr. (S-No.): 9941
according to EC Directive 2006/42/EC
We,
ATIKA GmbH
Josef-Drexler-Str. 8, 89331 Burgau - Germany
herewith declare under our sole responsibility that the product
Sägekettenschärfer (Chain sharpener) KSG 220 A
Serial number: 038000 - 080000
is conform with the above mentioned EC directives as well as
with the provisions of the guidelines below:
2004/108/EG and 2011/65/EU.
Following harmonized standards have been applied:
EN 61029-1:2009+A11:2010; EN 61029-2-10:2010;
EN 55014-1:2006+A1:2009;
EN 55014-2:1997+A1:2001+A2:2008;
EN 61000-3-3:2008; EN 61000-3-2:2006+A1:2009+A2:2009
Parts of IEC61029-2-10:1998
Keeping of technical documents at:
ATIKA GmbH - Technical department - Josef-Drexler-Str. 8 -
89331 Burgau - Germany
i.A.
Burgau, 01.10.2014
i.A. G. Koppenstein,
Engineering design management
Extent of delivery
• Chain sharpener KSG 220 A
• Rotary table, complete
• Chain stop
After unpacking, check the contents of the box
That it is complete
11
Check for possible transport damage
11
Report any damage or missing items to your dealer, supplier
or the manufacturer immediately. Complaints made at a later
11
date will not be acknowledged.
12
12
Symbols Operating instructions
12
12
Threatened hazard or hazardous situation. Not
13
observing this instruction can lead to injuries or
14
cause damage to property.
15
Important information on proper handling. Not
15
observing this instruction can lead to faults in the
machine.
15
User information. This information helps you to
16
use all the functions optimally.
16
Assembly, operation and servicing. Here you
16
are explained exactly what to do.
16
17
Symbols machine
17
17
Carefully read operator's manual before handling
the machine. Observe instructions and safety
rules when operating.
Shut off engine and remove power cord before
performing cleaning, maintenance or repair work.
Attention! Risk of cutting! Do not hold hands into
the rotating disc!
Wear protection gloves.
Wear dust protection.
Wear eye and ear protection.
Electrical devices do not go into the domestic
rubbish. Give devices, accessories and packaging
to an ecofriendly recycling.
According to the European Directive 2012/19/EU
on electrical and electronic scrap, electrical
devices that are no longer serviceable must be
separately collected and brought to a facility for an
environmentally compatible recycling.
11
• 1 pair of carbon brushes
• Mounting nut
• 1 operating manual
Publicidad
Capítulos
Tabla de contenido
