How To Charge - Xindao P239.572 Manual Del Usuario

5. After setting the target pressure, press the power button (3)
to start the inflation. Press the power button (3) again to pause
or continue the inflation. The inflation will stop automatically
when the target pressure was reached. Note: If you skip step 3
and 4, the target pressure is what you set last time.
6. When separate the air tube from the tire valve, please
complete this process quickly to reduce the leakage of air.
7. The inflator will not work when the target pressure is lower
than the current pressure.
How to inflAte cAr tyre:
For car tyres the pump can be used to inflate the tyre in case of
emergency, to make it to the next service station. When charging
a car tyre, the item needs to be connected to a car cigarette
lighter socket (B) for direct energy. The pump has an automatic
shut down function when the maximum pressure is reached. Can
also be used in reverse function to monitor the tyre pressure.

How to cHArge:

1. Charge the product before using with the charger (C). -
2, The charging indicator of the charging cable is red during the
charging. It will turn green when battery is fully charged.
led ligHting:
1. Press the power button (3) and the LED light (7) will turn on.
Press the button again to turn off the LED light (7). You can use
this function as flashlight.
2. The lighting of the LED remains even when the inflation was
paused. Pressing the power button (3) will turn off it.
3. Hold the UNIT button and the LCD display will turn off.