Starlyf SEW WHIZ Manual De Instrucciones página 4

ENGLISH
MINI TWO-THREAD ELECTRIC SEWING MACHINE
MANUAL OPTION
- Easy-to-insert bobbins and easy threading
- Two speeds (high and low) suitable for different sewing needs
IMPORTANT NOTE:
It is very important for users to become familiar with the sewing machine to get
the most out of it. Whether you are an expert sewer or are using a sewing
machine for the first time, it is advisable to do a few tests first on different kinds
of fabric to get the hang of it. If you follow the instructions carefully, you'll be
surprised how easy is to achieve excellent results from this small sewing
machine.
PRECAUTIONS
1- Make sure the ON/OFF button is in the OFF position.
Be careful not to touch this button while you are insta-
lling the batteries, plugging the machine in or chan-
ging the needle.
2- Keep the machine out of the reach of children. An
adult should always supervise any children using the
machine.
3- After using the machine, turn it OFF with the
ON/OFF button, remove the batteries and unplug the
machine from the mains.
4- Do not mix new batteries with old ones
5- Do not dismantle and reassemble the sewing
machine.
6- Do not start your sewing machine up until you have
your fabric in position, even if the upper and lower
threads are ready for use.
1. SEWING-MACHINE PARTS (A)
1- ON/OFF button
2- Speed regulator
3- Bobbin-winding spindle
4- Handwheel
5- Upper-bobbin spindle
6- Upper bobbin
7- Spool
8- Spool spindle
9- Thread tension unit
10- Thread-guide disks
11- Thread guide
12- Thread take-up lever
13- Needle bar
14- Presser-foot lever
15- Presser-foot support
16- Presser-foot pivot
17- Thread guide
18- Presser foot
19- Thread guide hole
20- Needle-bar screw
21- Needle (size 14)
22- Lid of lower bobbin compartment
23- Pedal socket
24- AC/DC adapter socket
25- Button for opening lid
26- Lower bobbin
ACCESSORIES (B)
1 pedal
1 needle threader
2 pre-wound bobbins
2 empty bobbins
1 spare needle
2. INSERTING THE BATTERIES (C)
Remove the battery-compartment lid at the bottom of the machine. Insert the
batteries, making sure they are lined up correctly.
If you are using an AC/DC adapter, ensure that the poles are correctly arranged,
as above.
(N.B.: To prevent any accidents from happening, make sure your sewing
machine is OFF before inserting batteries or plugging it into the wall socket.)
3. THREADING (D)
1- Upper bobbin
As shown on the front cover of this manual, the sewing machine is already
threaded when supplied. If you want to use a different thread or need to fill
another bobbin, lift up the spool spindle (8), place the spool of thread you require
on it and proceed as described in Point 6 (Bobbin winding). When the bobbin is
ready, place it on the bobbin spindle (5) and ensure that the bobbin turns
clockwise when the thread is unwound. Pass the thread through the wire thread
guide beside the bobbin spindle, then between the thread-guide disks (10) and
through the next wire thread guide. Then pass it through the hole of the take-up
lever (12), another wire guide and finally through the hole of guide (17) and the
eye of the needle, from the outside inwards. The free thread should then be
passed under the presser foot (18).
We recommend using the needle threader included in the accessory pouch to