Cellacom S51 Lite Manual De Usuario página 13

3.2 Connecting to BT Device
Step 1
Open your device's settings
menu. Under "Wireless &
Network" tap BT. Use the
switch to turn BT On or Off.
On BT icon at the top of your
screen will indicate when BT is
Step 2
If your device is running
Android 5.0 or higher, it will
be visible to nearby devices
while BT settings is open. If
using an old version, you
may need to make your
device visible by tapping
Menu > Visibility Timeout.
Step 3
Your main device will scan
for and display all available
BT devices in range under
"Available devices". If your
mobile device stops scanning
before your BT peripheral is
ready, tap search for devices
at the bottom of the screen.
12
Step 4
Touch the name of the BT
peripheral that you want to
pair your device with. If you
are prompted to enter a
passcode, try entering 000 or
1234 (common passcodes) or
consult the documentation
that came with the peripheral.
"Paired" will be shown next
to it if successful.
Step 6
To unpair a peripheral from
your device, select the BT
peripheral that you want to
configure and tap the
settings icon beside it. On
the screen that opens, you
can change the peripherals'
name. Tap the Back button
when you have finish.
Step5
To connect to a paired
peripheral, assuming you
have more than one in your
paired list. Make sure BT is
turned on and touch a paired
but unconnected peripheral.
When connected, it is
displayed as much in the list.