Parrot Zikmu Solo Guía De Utilización Rápida página 17

Connection with an iPhone
If you have an iPod Touch 2G (or later version) or iPhone 3 (or later version):
1. Login to the App Store
application.
2. Install your iPhone on the Parrot Zikmu Solo (diagram p.6) or connect it to the
speaker via B luetooth (refer to the Bluetooth > Connection section).
3. Launch the Parrot Audio Suite application and press Wi-Fi.
> The list of available Wi-Fi networks will be displayed.
4. Select your Wi-Fi network. Enter the WEP / WPA / WPA2 key if necessary.
5. Press Join.
> The Parrot Zikmu Solo is now connected to your Wi-Fi network.
Manual connection
The Parrot Zikmu Solo creates a Wi-Fi network by default. You can connect your
computer or Smartphone to this network in order to connect the Parrot Zikmu Solo
to your Wi-Fi network.
Note : If the Parrot Zikmu Solo has already been connected to a Wi-Fi network, it will
not create its own Wi-Fi network. To do so, you first need to reset the Parrot Zikmu
Solo Wi-Fi parameters by holding down the
1. On your computer, scan for available Wi-Fi networks.
and download the Parrot Audio Suite free
SM
button for 2 seconds.
English 17