Nikon GP-1A Manual Del Usuario página 31

Recording GPS Data Recording GPS Data
1
Connect the GP-1A (page 7 , 8) and turn the
camera on. The GP-1A LED ( ) will light and
a icon will be displayed in the control panel
O
on top of the camera.
LED icon (illustration shows
O
control panel for the
D7000 digital camera)
LED LED icon icon
O O
Blinks
Blinks GPS data not recorded.
red
Blinks Three satellites detected;
green GPS data recorded.
On
Four or more satellites de-
On
tected; GPS data are more
(green)
accurate.
The GPS Signal The GPS Signal
D D
GPS data will be recorded only if the GP-1A is able
to detect three or more satellites. If no signal is re-
ceived from the GP-1A for over two seconds, the
icon will no longer be displayed in the control
O
panel and no GPS data will be recorded.
Page 1 of 4 Page 1 of 4
Status Status
En
11