Publicidad
3
Set the unit upright. Press the shelf firmly at each
shelf corner, as close to the corner hole as possible
until firmly seated.
SHELF CORNER
5
Locate the two E Swivel Casters (the ones without a
locking tab) and insert them into the bottom of the
two posts along what you choose to be the back of
the file cart. Finish by inserting the two remaining
F Swivel/Locking Casters along the front of the file
cart. Casters are properly installed when they SNAP
into place.
5277-37: 2 of 2; 06/99
SHELF
Limited One-Year Warranty against defects in material and workmanship.
Safco Consumer Hot Line 1-800-664-0042
Safco Products Company, New Hope, MN 55428
4
Snap the remaining half-sleeves at the tops of
the posts (refer to step 2). Now slide the corner
holes of the A File Frame over the tops of the
posts. Press the corners down firmly until the frame
is fully seated over the half-sleeves.
HALF-
SLEEVES
6
Hang LETTER SIZE hanging folders from the long
sides of the file frame, or LEGAL SIZE hanging
folders using the short sides of the file frame.
LETTER SIZE
LEGAL SIZE
A
Publicidad
