Forgot Your Password; Reset To Factory Defaults - Buffalo MiniStation HD-PXTU2 Manual Del Usuario

3

Forgot your password?

If your MiniStation is in encrypted mode and you forget the password, follow the
procedure below to reset the unit back to itsy default settings.
Note: A Windows computer is required to reset this drive. The Secure Lock
Manager Easy software does not support Mac OS.
Restoring your drive to factory defaults will erase all data and passwords on the drive. To
access data on an encrypted drive, you must enter the correct password.
After resetting to factory defaults, the drive will be formatted in FAT32. If you want to be
able to save files larger than 4 GB, reformat the drive with NTFS or Mac OS extended after
resetting to factory defaults.
1
Connect the MiniStation to your Windows PC.
If the password verification screen is displayed, close it. If Windows Vista opens the
autoplay screen, close it.
2
Click [Start] - [(All) Programs] - [BUFFALO] - [Secure Lock Manager Easy] -
[Secure Lock Manager Easy].
Secure Lock Manager Easy will launch.
3
6
HD-PXTU2 User Manual

Reset to factory defaults

Click [Reset to the factory defaults].