OK
reset
1 6 12 18 24
D
C1
C
15:26:38
B
MENU
A
1
Res.
General information
· The middle communication line shows the
selectable menu item. If confirmed with OK,
this item is activated.
· Flashing texts or symbols require an entry.
· If no entries are made within the next
2 minutes, the clock reverts to Auto mode.
Function displays of the two left-hand
buttons:
scroll up in menu
scroll down in menu
Select/reject suggestion
Select/accept suggestion
+
Press briefly = +1
Press and hold (approx. 2 sec) = +5
-
Press briefly = -1
Press and hold (approx. 2 sec) = -5
GB
Display
E
A Function displays of the two left-hand buttons
B Channel status displays
F
= Channel 1 ON
= Channel 1 OFF
Channel 1 = C1, Channel 2 = C2
G
C 3 communication lines for time display, menu
items, entry prompts etc.
D Day-of-week display
E Overview of daily switching program
H
F Display of summer/winter time
G Operating voltage (permanently lit dots)
I
Reserve power operation (dots flash)
H Function displays of the two right-hand
J
buttons
K
Buttons
I Reset
The programs are retained in the case of a
reset. The date and time must be set again.
Press reset button with a blunt object (pen).
J Right-hand buttons
K Left-hand buttons with manual switch function
in Automatic mode
Function displays of the two right-hand
buttons:
MENU
Exits the Automatic mode and enters
the Programming mode
ESC
Press briefly = one step back
Press and hold (approx. 2 sec) = return
to Automatic mode
OK
Make selection and apply
EDT
Change request in Read mode
NO
Do not execute command
YES
Execute command
DEL
Delete
15