Descargar Imprimir esta página

Kohler K-1457-H2 Diagrama De Instalación página 2

Bañera de hidromasaje

Publicidad

Idiomas disponibles

Idiomas disponibles

No change in measurements if connected with drain
illustrated. (K-7161-AF or K-7161M-AF)
Recommended faucet area.
42" (106.7 cm)
2-1/4"
(5.7 cm)
1-1/2" OD
Product Information
Applicable product:
Drop-in bath whirlpool
Fixture*:
Bathing well:
Basin area, bottom
50" (127 cm) x 29" (73.7 cm)
Basin area, top
61" (154.9 cm) x 32" (81.3 cm)
Weight
130 lbs (59 kg)
To overflow:
Water depth
16" (40.6 cm)
Capacity
100 gal (378.5 L)
* Approximate measurements for comparison only.
Pump:
Heater
1.5 kW
* Approximate measurements for comparison only.
Included component:
Cut-out template
Required accessories:
Jet trim kit
1019738-1-D
3" (7.6 cm) x 24" (61 cm)
Flat Faucet Deck
Pump/Control Access
34" (86.4 cm) W x
15" (38.1 cm) H
K-1457-H2
V
A*
240
11
113311-7
K-9698
Note: Pump Protrusion Beyond Rim
2-1/2"
(6.4 cm)
33-1/2" (85.1 cm)
67" (170.2 cm)
3" (7.6 cm)
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual Current
Device (RCD):
Pump/control
Notes
NOTE: Pump protrusion beyond rim.
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of 51
lbs/square foot (247 kg/square meter) loading.
Hot water supply should be 70% of capacity or greater.
Installations will vary.
An access panel for the pump/control is required.
If installing a rim-mount faucet, make sure there is no interference
with drain overflow and circulating system before drilling any
holes. Consult local and national codes for minimum air gap
requirements if installing a spout on the faucet deck.
Fixture conforms to ANSI Standard Z124.1.2. All dimensions are
nominal.
2
13-1/2"
(34.3 cm)
6-1/2"
(16.5 cm)
3-1/2" (8.9 cm)
22"
(55.9 cm)
2-7/8" (7.3 cm)
208-240 V, 20 A, 50/60 Hz
Kohler Co.

Publicidad

loading