Paradigm SS-5500-3GB Manual Del Usuario página 3

4. The LED on the front of the Millenia CT 2's Control Box will flash 'BLUE'
5 times in quick succession to confirm the command was received.
5. Wait a few seconds, then again press the button on the 2nd remote
control to confirm the desired command.
6. The LED on the front of the Millenia CT 2's Control Box will again flash
'BLUE' 5 times in quick succession to confirm the command was received.
7. If the command was learned correctly, the LED on the front of the
Millenia CT 2's Control Box will now glow a brighter 'BLUE' .
Repeat steps 2 through 6 to learn additional commands. NOTE: If you wait
more than 20 seconds between programming commands, the Millenia CT 2
will exit the IR Learning Mode. Then you will have to start the entire process
again in order to program additional features.
To end IR Learning
If no other command is pressed, the Millenia CT 2 will automatically exit
IR Learning Mode in 20 seconds.
What to do if the LED flashes 'PURPLE'
If the LED on the front of the Millenia CT 2's Control Box flashes 'PURPLE' ,
the command was not received correctly. Please try again. If the LED on the
Control Box flashes 'PURPLE' after a second attempt, the Millenia CT 2 may not
be able to learn your remote control.
IMPORTANT: The IR Learning Mode operates via standard 38Khz IR protocol
only. Not all remotes function in the same manner. If the LED on the Control
Box continues to flash 'PURPLE' it could indicate an error, please try another
remote control.
EN 3