Singing Machine SOUNDX SMI-1420 Manual De Instrucciones página 6

OPERATION
Play the Keyboard
[1] To turn on the keyboard, set the POWER to ON. The display will illuminate.
Note:
To save power while unit is not in use, it will notify you with bell sound every 5 minutes.
[2] Adjust the volume to the desired level. Repeatedly press volume up or volume down to
increase or decrease the volume. The keyboard's volume ranges from 0 (no sound) to 10
(maximum), and the current volume level appears on the display.
Playing the Demo Song
You can listen to any of the 50 songs listed on the right side of the panel.
[1] Press SONG
Note:
The keyboard pre-selects the tune "Canon" (No. 01) each time the powered ON.
[2] Choose a song from the SONGS list and enter its two-digit number on the keypad, or,
press " " " " to move to the lower or higher numbered song. - +
[3] Press START/STOP
A "score" to display the notes that are playing is located in the center of the display.
•
• A "keyboard" is displayed fingering and which keys are pressed (bottom of the display)
The black dots next to the song number display the beat count in the measure.
•
• The musical chord is displayed at the left corner of the display.
[4] To change the tempo, repeatedly press
tempo setting appears.
[5] To select a different song, repeat step 2. To stop, press
Using Demo
To play a demo song one by one (in order from the selected starting point), press
DEMO . To stop the demo, press
. The display appears SONG along with the number of the current song.
to start playing the song.
DEMO
TEMPO UP or TEMPO DOWN
START/STOP
again.
E06
. The current
.