Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Fig. 2
3. The battery will take approximately 1 hr 20 min to charge.
The battery indicator LEDs will twinkle and illuminate one
by one during the charging process. Unplug the charger
immediately when the 3 LEDs are all illuminated.
m
CAUTION!
FIRE HAZARD. When disconnecting the
charger from the battery, be sure to unplug the charger from
the outlet first, then disconnect the charger from the battery
Assembly
m
WARNING!
Do not insert the battery until assembly is
complete. Failure to comply could result in accidental starting
and serious personal injury.
m
WARNING!
To prevent serious personal injury, make
sure the battery is removed, and the blades have come to a
complete stop before inspecting, cleaning, or servicing the unit.
m
WARNING!
The product must be fully assembled
before operation. Do not use a product that is only partially
assembled or assembled with damaged parts.
Follow the assembly instructions step-by-step and use the
pictures provided as a visual guide to easily assemble the
product.
Assembling + Fitting the Head
1. With the tiller + cultivator head lock unlocked, insert the
tiller + cultivator head into the end of the pole assembly
until it clicks in place (Fig. 3).
Fig. 3
Tiller +
cultivator
head lock
Battery
indicators
2. Flip up the tiller + cultivator head lock to lock the tiller +
cultivator head in place (Fig. 4).
Fig. 4
Tiller +
cultivator
head lock
m
WARNING!
properly tightened before using the cordless tiller + cultivator.
3. To disassemble the tiller + cultivator head from the
pole assembly, unlock the tiller + cultivator head lock,
then press in the releasing tabs on each side, and at the
same time pull the tiller + cultivator head out from the
pole assembly (Fig. 5).
9
Pole assembly
Tiller +
cultivator
head
Tiller +
cultivator
head
Make sure nuts, screws and locks are
Pole assembly
Publicidad
Tabla de contenido
