Halsey Taylor HTVZ8BL Manual Del Propietário página 5

Left Hand Wrapper
(High Side)
1) Remove existing wrapper by removing
the (4) screws from bottom.
2) Screw trim piece to wrapper
with (2) screws (provided)
3) Re-install wrapper with (4) screws.
4) Dispose of unused
cover plate.
Left Hand Wrapper
(Low Side)
1) Remove existing wrapper by removing
the (4) screws from bottom.
2) Clip cover plate, sliding until plate sits
flush with the wall.
3) Re-install wrapper with (4) screws.
4) Dispose of unused trim piece.
HTVZDBL*1C HTVZDBLWF*1C
Wrapper Fill
Piece Location
(Left Side High)
PAGE 5
WWW.RESTROOMDIRECT.COM
HTVZ8BL*1C HTVZ8BLWF*1C
Versatile Wrapper and Trim Kit
Installation Instructions
Right Hand Wrapper
(Low Side)
1) Remove existing wrapper by removing
2) Clip cover plate, sliding until plate sits
3) Re-install wrapper with (4) screws.
4) Dispose of unused trim piece.
Right Hand Wrapper
(High Side)
1) Remove existing wrapper by removing
2) Screw trim piece to wrapper with (2)
3) Re-install wrapper with (4) screws.
4) Dispose of unused cover plate.
Wrapper Fill
Piece Location
(Right Side High)
704 • 937• 2673 129 Oakpark Dr., Unit A, Mooresville, NC 28115
the (4) screws from bottom.
flush with the wall.
the (4) screws from bottom.
screws (provided)
1000002723 (Rev. B - 01/19)