3. Attach handle to mirror using included hex bolts and
9/16" wrench. (See Figure 3)
Figure 3
4. Remove protective cover on center bolt of caster
assembly. (See Figure 4)
Figure 4
To clean mirror, use a mild glass cleaner and a
soft cloth.
PAGE 2 OF 6
ASSEMBLY INSTRUCTIONS CONTINUED
MAINTENANCE
1-800-295-5510
uline.com
5. With included lock washer placed onto center
assembly center bolt, tighten caster assembly to
threaded hole in center of mirror back. Use flathead
screwdriver as necessary. (See Figure 5)
Figure 5
WARNING! Do not use any cleaner containing
ammonia, as this could damage the mirror.
0621 IH-6675