TaoTronics TT-SH020 Instrucciones De Montaje página 4

3. Loosen the swivel joint and the support arm adjuster. Rotate
until you nd the perfect angle, and then turn to tighten
when done (do not turn the joints too tightly).
4. Press the release button to release the holder arm and the
foldable foot. Pull out the foldable foot.
5. Place your device inside the holder and push the arms to
tighten the grip.
6. Installation complete!
Removing the Mount
A
B
A. Lift the lock to unlock.
B. Lift the release tab to detach the suction mount.
03/04