Installation Instructions - Kinetico Water Systems premier COMPACT Manual De Instalación Y De Usuario

10

Installation instructions

1
Locate:
a: Ensure the unit can be
positioned on a flat surface.
b: If sand, silt or turbidity are
present in the water supply, a
pre-filter should be installed
before the water softener.
Please note: For ease of installation
the softener can be installed with the
connections on the left or right side of the
cabinet by reversing the components.
2
Insert blanking plate:
Insert the blanking plate into the
outlet which is not in use.
Lift up into position, then drop the
plate down into the slot.
Kinetico Premier Compact Water Softener Installation and User Manual
3
Test water pressure:
Test incoming pressure to the
unit. A pressure regulating valve
will be required if the pressure
is above 6 bar.
4
Install:
Plumb pipework as necessary to
accommodate a by-pass assembly,
h 105mm x w 194mm x d 80mm.