Conceptronic C8CHIPSKIT Manual Del Usuario página 4

English
Connecting your system
Connect the Cameras
1.
cable and connect the camera RJ45 socket by one end; connect one of the 4
ports on NVR by the other end of this cable. Repeat this step if there are
more cameras to be connected.
Connect the NVR to a network
2.
switch that is in a network. The NVR can then be remotely accessed through
Intranet or Internet, e.g. Mobile Apps or remote PC client.
Connect the NVR to a Monitor/TV
3.
for the video output. Connect NVR either HDMI or VGA port to the
Monitor/TV. If the TV/Monitor supports HDMI input, the video output through
HDMI is the most recommended.
Connect the Mouse
4.
package) to either of the two front USB ports. The mouse will be utilized for
most of NVR local operations.
Note:
The rear USB port is suggested to be reserved for external HDD.
Connect the power adapter
5.
steps are all completed. The NVR can now be powered up by plugging in the
power adapter.
Enjoy the use of your Conceptronic 8-Channel IP Surveillance Kit!
: To connect camera to the NVR, get an Ethernet
: Connect NVR LAN port to a router or
: Connect a USB mouse (or the one included in the
: Up to now, the connections in previous
: The NVR supports HDMI and VGA