POSSIO
8. Advanced Setup
8.1 Power-down time
Sets the power-down time after the last action. 600 minutes is the factory default and
maximum is 999 minutes. In connection with Vehicle mode GRETA will switch off after the
specified time once the vehicle is turned off.
NOTE: This function is disabled if a power charger is connected to the unit.
Please observe that if the power down time is set to max it might cause your
vehicle battery to be drained.
8.2 Power modes
Power modes is used to power on /off GRETA with special criteria's. Sets the power mode
to be used by GRETA.
8.2.1 Deactivates all
Deactivates all power modes and GRETA can be powered on and powered down
using
and
.
8.2.2 Vehicle mode
GRETA can only be power up when a charger is attached. This function is the factory
default in order to prevent accidental power on during transport. This function can
be used in vehicles where the charger is connected to the vehicle system. GRETA will
automatically power up when the ignition is turned on.
• On (Factory default)
• Off
8.2.3 Flight mode
GRETA's GSM module can be turned off in environments that prohibit use of radio
frequency devices. All functions that are not GSM related can still be used.
• On
• Off
• Emergency calls will not work when GRETA is set to flight mode as the GSM
module is turned off!
• GSM related functions will not work in flight mode.
• Flight mode needs to be set before entering areas prohibiting use of radio
frequency devices.
18
GRETA USER MANUAL
POSSIO
8.3 Security
8.4 Call diverts
Sets the divert option for voice, fax and data calls to a user defined number.
8.3.1 Key lock
To prevent accidental usage of the key functions GRETA can be set to lock all keys.
Press
and follow the on-screen instructions. To unlock the keys just press
and follow the instructions on the LCD.
• On (automatic key lock after 15 seconds)
• Off (Factory default)
8.3.2 PIN request
Most SIM cards are delivered with PIN code request turned on. If you would like to
turn off the PIN request every time GRETA is started you can select to switch it off.
• On (Factory default)
• Off
8.4.1 Cancel all diverts
All diverts are deactivated. This is the factory default.
8.4.2 Divert voice calls
Incoming voice calls will be diverted to a user set defined number.
• Divert all calls: All voice calls are diverted to a user defined phone number.
• Divert if busy: Voice calls will be diverted to a user defined phone number
when busy.
• Divert if not answered: Voice calls will be diverted to a user defined phone
number when not answered.
• Divert delay: Voice calls will be diverted to a user defined phone number when
not answered after x seconds.
NOTE: Divert delay will only work if divert no answer is activated.
8.4.3 Divert fax calls
All incoming fax calls are diverted to a user defined fax number.
8.4.4 Divert data calls
All incoming data calls are diverted to a user defined data call.
8.4.5 Print all divert settings
Prints all current divert settings.
GRETA USER MANUAL
again
19