Axis D2050-VE Guia De Instalacion página 21

• Calibration using pins: The calibration is performed in the web interface by dropping
pins in know locations in the reference map and setting the distance between the pins.
When calibrating using pins, you need to select the mounting position of the radar
module inside the detector.
• Calibration using tracks: The calibration method requires a person to move in front of
the radar.
You can do this yourself while accessing the web interface from a mobile device, or have
someone else move and follow your instructions.
When moving around in the different steps, move to places that are easy to find in
the reference map.
How to configure the detector
1. To upload a reference map, go to Settings > Radar > Reference map. Select Browse to
find an image file, and select Upload to place the image in the live view.
2. To calibrate the reference map, go to Settings > Radar > Reference map calibration.
Select Start calibration and follow the instructions.
How to install multiple detectors
If two radar detectors of are mounted close together they may interfere with each other. To avoid
problems, select different channels for the detectors.
1. Go to Settings > Radar > General and select Channel.
AXIS D2050-VE Network Radar Detector
21