Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
User manual
5. - HOW TO USE THE PRODUCT
5.1.- MAIN MENU
When the programmer connector is inserted
in the "PROG" socket of the front pannel the
first information displayed is the program-
mer version.
PCT X.X
firmware
------------
Version X.XX
Then the unit version and build number are
displayed:
Unit
Firmware
version:
V: X.XX
a.- Output menu
The first main menu shows the output fre-
quency/channel (depending on the freq.
mode) and the output level.
OUTPUT
Frequency:
474.25 MHz
Level: 00
The output frequency range is 47-862 MHz.
The output level control ranges from 00 to
99.
To change the frequency you must press
the
button until is located over the selec-
ted digit. By using
and
you can modify
the value of the digit. The following decimal
values are permitted for the output fre-
quency:
=> .00 MHz
=> .25 MHz
=> .50 MHz
=> .75 MHz
To modify the output channel and the output
level you must press
until the cursor is
situated over the desired parameter, the
value can be modified by pressing
36
COFDM-PAL CI STEREO
OUTPUT
Channel:21
(471.25 MHz)
Level: 99
To switch between frequency mode and
channel mode see 5.2. EXTENDED MENU.
b.- Input menu
This menu displays the following input para-
meters: input frequency or input channel
(depending on the selected mode), bandwith
selection (7-8 MHz) and preamplifier power
supply (0, 12 or 24V).
To modify a parameter you must press
until the desired parameter flashes on and
off. Then you can change the value using
and
.
INPUT --
Frequency:
474MHz |8MHz
Preamp: 12v
and
Publicidad
Capítulos
Tabla de contenido
