Publicidad
English
Take the companion CD, KVM Cables and the KVM Switch out of
the box and follow the steps below for installation.
1. Make sure all the computers that are to be connected to the KVM
Switch and their peripherals are in powered-off state. If not, power
them off before you proceed with the following steps.
2. Connect the shared PS/2 keyboard, PS/2 mouse, D-Sub monitor,
speaker set and microphone to the KVM switch.
3. Connect each of your computers to the KVM switch, using
appropriate KVM & Audio/MIC cables that companion with KVM
switch in the package.
(Models KVM-0212 and KVM-0412 not support audio switching)
Publicidad
