Team International TEAM EM 10 Manual De Instrucciones página 7

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 13
Copies of the I/B. Please reproduce them without any changes
except under special instruction from Team International BELGIUM.
The page must reproduced and folded in order to obtain a booklet
A5 (+/- 148.5 mm width x 210 mm height). The pages must be folded
in order to keep the good numbering when you turn the pages of the
I/B . Don't change the page numbering. Keep the language
integrity.
Fax +32 2 359 95 50
IMPORTANT INFORMATION
This appliance is not for professional use. You should follow the requested breaks. Failure to
follow this instruction carefully may result in damage to the motor. Please refer to the rating
label for the maximum continuous usage time (KB xx min where xx is the maximum usage time).
The breaks should last at least 10 minutes.
USE
Caution: Make sure that the appliance is unplugged when attaching the blades. Remove
the blades from the protecting covering (cf. Fig. 1). Hold on to the blades with the thumb
and forefinger in such a way that the cutting edges face downwards; then press the
back-ends of the blades into the opening provided for that purpose until they lock into
place (cf. Fig. 2).
Plug in your appliance and press the on/off switch (cf. Fig. 3). Now the appliance is ready
for use. Do not use a cutting motion, simply hold the knife gently in place; it will do the
cutting automatically. Cutting takes place smoothly and without effort. With your electric
knife you can cut as needed either vertically or on a slant.
Caution: Do not use your knife for cutting bones or frozen food. It is not meant for this
purpose.
When you have finished using your electric knife, release the button and pull out the plug.
Then press the eject button. The blades can now be easily removed. (cf. Fig. 4).
CLEANING
The blades are made of stainless steel and can therefore be cleaned easily.
We advise you to use warn soapy water. If you want to clean the individual blades, do so
by pushing the blades along the groove upwards until they can be removed from the
holding pin (cf. Fig. 5). To mount, reverse the process.
The blades need no special maintenance.
Sharpening is not necessary as the blades are self-sharpening due to the permanent
friction of the blades during use.
After cleaning place the blades in the protective covering and store away.
In order to clean the appliance itself use a damp cloth and dry afterwards.
Never hold it under running water nor immerse in water or any other liquid.
PROTECTION OF THE ENVIRONMENT– DIRECTIVE 2002/96/EC
In order to preserve our environment and protect human health, the waste electrical and
electronic equipment should be disposed of in accordance with specific rules with the
implication of both suppliers and users. For this reason, as indicated by the symbol
rating label or on the packaging, your appliance should not be disposed of as unsorted
municipal waste. The user has the right to bring it to a municipal collection point performing
waste recovery by means of reuse, recycling or use for other applications in accordance with
the directive.
7
Assembly page 7/20
on the
TEAM EM 10 - 070228

Publicidad

Tabla de contenido
loading

Tabla de contenido