V-TAC VT-5556 Manual De Instrucciones página 2

Ocultar thumbs Ver también para VT-5556:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 40
• If the room to be cleaned has a balcony, a physical barrier
should be used to prevent access to the balcony and to
ensure safe operation.
• Do not place anything on top of this device.
• Be aware that this device moves around on its own. Take
care when walking in the area where this device is operating
to avoid stepping on it.
• Do not operate this device in areas with exposed electrical
outlets on the floor.
• Do not expose the electronics of this device, its battery, or
the integrated Charging Base. There are no user-serviceable
parts inside.
• Do not use this device on an unfinished, unsealed, waxed or
rough floor. It may result in damage to the floor and this
device. Use only on hard floor surfaces or lowpile carpet.
• This device has been designed to be used on floors without
scratching them. We still recommend that you test this device
on a small area of the room to be cleaned to ensure no
scratches are made before cleaning the whole room.
• Ensure that the robot laser vacuum is not connected to the
mains supply before cleaning.
• Remove the plug from the socket outlet before cleaning or
maintaining the appliance.
Notice
This symbol on the device or its packag-
ing indicates: Do not dispose of electrical
appliances as unsorted municipal waste;
use separate collection facilities. Contact
your local authority for information
regarding the collection systems avail-
able. If electrical appliances are disposed
of in landfill s or dumps, hazardous
substances can leak into the groundwa-
ter and get into the food chain, damaging
your health and well-being. When
replacing old appliances with new ones,
the retailer is legally obliged to take back
your old appliance for disposal at least
free of charge.
2

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

7933

Tabla de contenido